 Car Stereo Help Removal Guide Acura Audi BMW Buick Cadillac Chevrolet Corvette Chrysler Daewoo Dodge Ferrari Ford Geo GMC Honda Hyundai Infiniti Isuzu Jaguar Jeep Kia Land Rover Lexus Lincoln Mazda Mercedes Benz Mercury Villager Mitsubishi Nissan Oldsmobile Plymouth Pontiac Porsche Saturn Subaru Toyota Volkswagen Volvo |
Mercury Villager Car Stereo Removal and Install | |
|
Car Stereo Repair Home | Car Stereo Removal | BOSE repair | FAQ | Shipping | Top 10 | About Us WE REPAIR FACTORY MERCURY
CAR RADIOS |
||
 |
Mercury
Villager See our Shipping page and Free Repair Estimates and Bose Repair. |
|
 |
1) Remove two screw clips from right side of bottom console. | |
 |
1) Remove two screw clips from
left side of bottom console. 2) Pull console forward and set to side. |
|
 |
1) Remove two exposed screws. | |
 |
1) Remove ash tray. 2) Remove two exposed screws from ash tray cavity. |
|
 |
1) Pull car stereo trim panel forward, releasing four clips. 2) Remove four screws securing car stereo to dash. |
|
 |
1) Pull car stereo forward from dash. | |
 |
1) Remove two screws from each side of car stereo securing
it to mounting bracket. 2) Disconnect antenna and wire harness. 3) Remove car stereo forward from bracket. 4) See our Shipping page and Free Repair Estimates and Bose Repair. |
|
| If you have
found these pages to be helpful, please CLICK HERE! |
||
