Car Stereo Help Removal Guides Acura (32+ Items) Alfa Romeo (2 Items) Audi (19+ Items) BMW (25+ Items) Buick (20 Items) Cadillac (61+ Items) Chevrolet (131+ Items) Citreon (3 Items) Corvette (21+ Items) Chrysler (49+ Items) Daewoo (5+ Items) Dodge (57+ Items) Ferrari (4 Items) Fiat (6 Items) Ford (106+ Items) Geo (6 Items) GMC (47+ Items) Holden (+ Items) Honda (73+ Items) Hyundai (18+ Items) Infiniti (32+ Items) Isuzu (26 Items) Jaguar (2 Items) Jeep (29+ Items) Kia (10 Items) Lancia (+ Items) Land Rover (12+ Items) Lexus (55+ Items) Lincoln (22+ Items) Mazda (50+ Items) Mercedes Benz (37+ Items) Mercury (22+ Items) Mini Cooper (1 Items) Mitsubishi (38+ Items) Nissan (120+ Items) Opel (6 Items) Oldsmobile (19 Items) Peugeot (6 Items) Plymouth (13+ Items) Pontiac (37+ Items) Porsche (7 Items) Renault (6 Items) Rover (3+ Items) Saab (2 Items) Saturn (17+ Items) Scion (5+ Items) Seat (2 Items) Skoda (+ Items) Smart (+ Items) Subaru (7 Items) Suzuki (10+ Items) Toyota (93+ Items) Vauxhall (5 Items) Volkswagen (26+ Items) Volvo (4 Items)	Do It Yourself Repair Section
	(Disclaimer - most common repairs are attempted in the following sections. This informative section is not a "Cure all", only possible repairs. If you are not qualified to attempt these repair, don't)
	If you have found this page to be helpful, please CLICK HERE!
	Slotted Din Removal Tools	Slotted Din Removal Tools required for many Audi Car Stereo Removals.

	Audi A4 / A6 Matsushita / Panasonic	Intermittent or erratic volume control. There are two possible repairs that may repair this problem. The following is a step by step process for possible repair after removal of car stereo from dash.
		Gently pry around edges of face plate and frame of car stereo.
		Work around all edges, top, bottom and sides releasing locking clips.
		Remove face plate from car stereo.
		Remove all screws securing printed circuit board to face plate.
		Gently remove printed circuit board from face plate, volume control knob will release with slight pressure.
		Be sure all switch pad line up in their locations on face plate before reinstalling printed circuit board.
		With a Control/Contact Cleaner, spray rheostat, rotate and repeat several times. (Repair #1) (This rheostat is not accessible from the face of the stereo) If you have found this information to be helpful, please CLICK HERE!
		On opposite side of printed circuit board. Repair all solder connections, both top and bottom sides of two white connectors. (Repair #2)

Factory Car Stereo Repair, Inc.
1987 Corporate Square Suite 159
Longwood, Fl. 32750

PHONE (407)830-0777, GOT QUESTIONS?
Normal Business hours Monday Thru Friday 9am to 5pm EST.

Home page Car Stereo Help