|
|
||
|
Car Stereo Repair Home
| Car
Stereo Removal |
BOSE Repair |
FAQ |
Shipping |
Top 10 |
About Us |
||
 |
No or Intermittent Display Dealerships quote replacement at $175-340. |
|
 |
These instructions apply specifically to model number 10367041. Although most AC controls are similar. You may be able to recognize the problems with other AC controls by giving them a good visual inspection. | |
 |
1.1) Remove both knobs from face of AC Control. | |
 |
2.1) From back of AC Control, remove four screws. | |
 |
3.1) Remove front panel from AC control. | |
 |
4.1) Lift display and printed circuit board from back cover. | |
 |
5.1) Display printed circuit board is attached by wire harness. Lay front panel toward top. | |
 |
6.1) Locate two sets of two rows of solder connections. This is where the main connectors from the factory wire harness attach. | |
 |
7.1) Resolder both sets of two
rows of connections. Note - With the pressure supplied to these connectors from the factory wire harness and the continuous vibration from the vehicle, these solder connections become broken or have poor connections. |
|
| If you have
found this page to be helpful, please CLICK HERE! |
||