Chevrolet Caprice Classic Car Stereo / Speaker Removal
	We repair this Bose system 1.1) Remove screws along top edge of trim panel above gauges.
	2.1) Remove screw from cavity below dash.
	3.1) Remove screws along bottom edge of bottom kick panel.
	4.1) Remove bottom panel by releasing clips.
	5.1) Open glove box and gently pry trim panel from dash.
	6.1) Remove exposed screws from panel removal.
	7.1) Release glove box door panel hold from slot. 7.2) Remove dash trim from dash and car stereo.
	8.1) Loosen 10mm bolts securing car stereo to dash. 8.2) Pull car stereo from dash, disconnect antenna and connectors.
	Factory Wire Color Codes See Diagrams Below
	Aftermarket Wire Color Codes See Diagrams Below
	Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up
	NO AUDIO With aftermarket stereo installation?
	Erratic Volume Control DIY Repair
Chevrolet Caprice Classic Speaker Removal and Replacement
Chevrolet Caprice Classic Front Speaker How to Remove and Install We repair this Bose system 1.1) Release caps at each side of door pull handle, remove exposed screws and pull handle. 2.1) Remove screw from door open handle cavity. 3.1) Remove one screw from back of panel above door pocket. 4.1) Remove two screws from arm rest cavity. 5.1) Gently pry control panel from door panel. 6.1) Gently pry arm rest control panel from arm rest. 7.1) Pry bottom of door panel away from door releasing clips. 8.1) Feed arm rest control panel through opening in door. 8.2) Lift door panel up out of window jam, disconnect connectors to door panel and remove. 9.1) Remove screws securing door speaker to speaker enclosure.
	Chevrolet Caprice Classic Bose Amplifier How to Remove We Repair this Bose System 1) Bose amplifier is located in trunk, it is bolted to the bottom of the package shelf with four 10mm bolts. Remove bolts, disconnect connectors and remove.
Rear Speaker Removal and Installation presently not available.
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You