Cirrus and Sebring Car Audio Removal and Installation | |
![]() |
Chrysler Cirrus |
![]() |
1.1) Remove two screws at bottom of trim panel. |
![]() |
2.1) Pull dash trim panel forward, releasing two clips at top of panel. |
![]() |
3.1) Remove four screws securing
car stereo to dash. 3.2) Pull car stereo forward, disconnect antenna, ground strap, and connectors. |
Aftermarket Car Stereo Install |
|
Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up |
|
NO AUDIO With aftermarket stereo installation |
|
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You |
|