Sebring Removing and Installing Car Audio
Chrysler Sebring Removing and Installing Car Stereo 1.1) Gently pry trim panel from dash and remove. 2.1) Remove two 10mm bolts securing car stereo to dash. 3.1) Remove car stereo from dash. 4.1) Disconnect CD Changer connector from back of car stereo. For CD Changer removal instructions. 5.1) Remove antenna connector and release triggers on power and speaker connectors.
	Aftermarket Car Stereo Install
	Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up
	NO AUDIO With aftermarket stereo installation
Chrysler Sebring CD Changer Removal Chrysler Sebring Convertible Removing CD Changer Lower Dash Mounted CD Changer SEE CAR STEREO REMOVAL FIRST   1.1) Remove two screws inside bottom edge of dash trim panel accessible from car stereo removal instruction. 2.1) Remove two upper screws from each side of car stereo opening. 3.1) Remove fuse box cover from drivers side of dash. 4.1) Remove on exposed screw from end of dash trim cover panel. 5.1) Lift and release end of dash trim cover panel. 6.1) Release top dash trim panel from right side of dash. 7.1) Release bottom of dash trim panel. 7.2) Lift panel from dash and remove. 8.1) Remove two bottom screws exposed from dash trim panel removal above CD changer. 9.1) Set parking brake, insert key into ignition and shift to low gear. 10.1) Slide CD changer from dash. 11.1) Release wire harness. 12.1) Feed CD changer cable down from car stereo cavity. 13.1) Disconnect lighter connections and remove car stereo CD changer.
Chrysler Sebring Convertible Remove and Install Speakers Chrysler Sebring Removing Front Speakers 1.1) Grasp bottom edge of speaker grill and pull from door panel releasing clips. All clips release with pressure. 2.1) Release all clips and remove speaker grill. 2.2) Remove screws securing speaker to door. 2.3) Release trigger on speaker connector to disconnect.
Sebring Convertible Remove and Install Rear Speakers Chrysler Sebring Removing Rear Speakers 1.1) Gently pry leading edge of speaker grill cover releasing clips. All clips release with pressure. 2.1) Release all clips and remove speaker grill. 2.2) Remove screws securing speaker to door. 2.3) Release trigger on speaker connector to disconnect.
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You