Dodge Ram Car Stereo and Speaker Replacement |
|
Dodge Ram
Factory Car Stereo Removal Must have pocket below car stereo that opens. |
|
Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up |
|
NO AUDIO With aftermarket stereo installation |
|
Dodge Ram Front Speaker Removal | |
1.1) At top front edge of door panel, remove screw at opening. | |
2.1) Look into opening at door open handle for door handle mounting bolt. | |
3.1) Remove 11 mm bolt. | |
4.1) Remove door handle and set to side. | |
5.1) With door handle removed remove screw at opening on door panel. | |
6.1) Along bottom front edge of door panel, remove screw. | |
7.1) Along bottom back edge of door panel, remove screw. | |
8.1) To remove door panel, tap up on bottom of panel. Panel will move upwards. | |
9.1) Lift back edge of door panel up over door lock out of window jam. | |
10.1) Back of door panel has hooks along edges. | |
11.1) Hooks mate to slots on door panel. Note - Lifting panel up releases hooks from slots. Pushing door panel down locks door panel into place. |
|
12.1) Pull top edge of door panel back for access to back of panel. | |
13.1) Locate wires from door to window and door lock control panel. | |
14.1) Squeeze trigger on connector into connector to release lock. | |
15.1) Remove connector. | |
16.1) Squeeze trigger on second connector into connector to release lock. | |
17.1) Remove connector. Note 1 - Passenger's door may have less connectors. |
|
18.1) Remove screws securing speaker to door. Remove and disconnect. | |
19.1) When reinstalling door panel, align door lock with opening in door panel. Note - Hooks along bottom of door panel are longest and should be aligned first before aligning remaining hooks and pushing panel down to lock into place. |
|
Dodge Ram Rear Speaker Removal | |
Dodge Ram Speaker Removal | |
1.1) Look into opening at door open handle for door handle mounting bolt. | |
2.1) Remove 11 mm bolt. | |
3.1) Remove door handle and set to side. | |
4.1) With door handle removed remove screw at opening on door panel. | |
5.1) To remove door panel, tap up on bottom of panel. Panel will move upwards. | |
6.1) Lift door panel up over door lock and out of window jam. | |
7.1) Pull top edge of door panel back for access to back of panel. | |
8.1) Locate wires from door to window and door lock control panel.. 8.2) Squeeze trigger on connector into connector to release lock. |
|
9.1) Remove connector. 9.2 Remove door panel and set to side. |
|
10.1) Back of door panel has hooks along edges. | |
11.1) Hooks mate to slots on door panel. Note - Lifting panel up releases hooks from slots. Pushing door panel down locks door panel into place. |
|
12.1) Remove screws securing speaker to door. Remove and disconnect. | |
13.1) When reinstalling door panel, align door lock with opening in door panel. | |
14.1) Hooks along bottom of door panel are longest and should be aligned first before aligning remaining hooks and pushing panel down to lock into place. | |
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You |
|