Ford Bronco, Ranger and F Series Pick Up How to Do It Yourself Car Stereo Removal Guide
Ford Bronco 87-91 Ranger 89-93 How to Removal and Install Car Stereo Stereo Removal Tools 1.1) Remove ash tray. 2.1) Remove two screws securing ashtray frame. 2.2) Pull frame from cavity. 3.1) If you have an automatic, set parking brake and shift to lowest gear. Remove trim by pulling to release clips from AC controls, gauges and car stereo. * Be careful of Emergency Flasher switch, it is expensive to replace. 3.2) Use DIN removal tools to remove car stereo from dash.   Ford "Din" Removal Tools, purchase at a local Auto Parts Store
	Ford Computer Repair - DIY
	Ford Car Stereo Repair No Display
	Ford Wire Harness Factory Wire Harness Codes Below
	Aftermarket Wire Color Codes, Hook Up and Install Factory Connector Codes Below
	Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up
	NO AUDIO With aftermarket stereo installation?
Front and Rear Speaker Removal and Installation presently not available.
Ford Car Audio - Wire Diagrams - Wire Color Codes Factory Wire Harness Codes     DO NOT CUT FACTORY WIRE HARNESS     Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above. I discourage cutting the factory wire harness. This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.   Diagram 1     Diagram 2     Diagram 3     Diagrams NOT ACCURATE for 100% of vehicles.
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You