\

Ford Ranger Car Audio - Speaker Removal and Installation
Ford Ranger How to Remove Door Panel and Speaker Replacement 1.1) Remove screw from corner of door panel. 2.1) Remove screw from hand hold well. 3.1) Remove screw from top of panel. 4.1) Lift cover from window crank and remove one torx screw and remove window crank. 5.1) To remove door panel, place hand in door hand hold and pull panel slightly away from door so the panel will clear door open handle while lifting door panel straight up. There are no panel clips, just hooks that go down and into the door. 5.2) Remove four screws securing 5x7 speaker to door.
	Ford Wire Harness Factory Wire Harness Codes Below
	Aftermarket Wire Color Codes, Hook Up and Install Factory Wire Connector Codes Below
	Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up
	NO AUDIO With aftermarket stereo installation?
Car Stereo and Rear Speaker Removal and Replacement presently not available.
Ford Car Audio - Wire Diagrams - Wire Color Codes Factory Wire Harness Codes     DO NOT CUT FACTORY WIRE HARNESS     Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above. We discourage cutting the factory wire harness. This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.   Diagram 1     Diagram 2     Diagram 3     Diagrams NOT ACCURATE for 100% of vehicles.
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You