 |
Ford Windstar
How to Remove and Install Front Door Panel and Speaker Instruction |
 |
1.1) Remove one screw along bottom
front edge of door
panel. |
 |
2.1) Remove one screw along bottom
rear edge of door
panel. |
 |
3.1) Gently pry top edge of
small triangular trim panel from door releasing clips. All clips release
with pressure. |
 |
4.1) Pull small triangular
trim panel back from door panel releasing all clips. |
 |
5.1) Lift small triangular
trim panel up to release from lower dash panel. |
 |
6.1) Gently pry leading edge
of door trim panel incorporating door open handle. |
 |
7.1) Work across top of door
open handle trim panel releasing clips. |
 |
8.1) Remove trim panel over
door open handle and set panel to side. |
 |
9.1) Gently pry back edge of
control trim panel from arm rest releasing clips. |
 |
10.1) Gently pry front edge of
control trim panel from arm rest releasing clips. |
 |
11.1) Lift control panel up
from arm rest. |
 |
12.1) Release trigger on
connector to disconnect and remove.
Note - To
release connector, squeeze trigger at center of connector into connector
to remove. |
 |
13.1) Release trigger on
second connector to disconnect and remove. |
 |
14.1) Remove control panel and
set to side. |
 |
15.1) Remove exposed screw
from control panel removal. |
 |
16.1) Grasp door trim panel
and pull up.
Note - Door panel has downward hooks,
pulling panel up will release hooks from door. |
 |
17.1) Lift door panel up over
door lock pin. |
 |
18.1) Remove door panel and
set to side. |
 |
19.1) Remove four screws
securing speaker to door panel. |
 |
20.1) Pry speaker from door
panel. |
 |
21.1) Pry trigger on side of
connector away from connector to release and remove speaker. |
