Aftermarket stereo installation?
Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver!Factory wire colors codes are not universal. See Aftermarket Videos above.
We discourage cutting the factory wire harness.
This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.
Diagrams may not be applicable to Bose Audio Systems
IMPORTANT - There are two (2) yellow*, two (2) gray and two (2)
brown wires in this harness. Locate the +12 volt constant wire first.
Label it or splice to constant wire on aftermarket stereo first. Swapping
yellow wires will cause damage to any aftermarket stereo. Check fuses if your unable to find +12 volts.
1
Gray
Left Front Speaker (-)
2
Tan
Left Front Speaker (+)
3
Dark Green
Right Front Speaker (-)
4
Light Green
Right Front Speaker (+)
5
Black
Ground
6
Brown
Illumination
7
Gray
Dimmer
8
Blank
9
Yellow* (Green)
Switched +12 volts
10
Orange
Constant +12 volts
11
Light Blue
Right Rear Speaker (-)
12
Dark Blue
Right Rear Speaker (+)
13
Yellow
Left Rear Speaker (-)
14
Brown
Left Rear Speaker (+)
All wire diagrams and color codes are not 100% accurate.
Rear Speaker Removal and Install presently not available