Isuzu Amigo Car Stereo and Speaker Remove and Replace
Isuzu Amigo Car Stereo Remove and Replace 1.1) Remove ash tray. 1.2) Remove exposed screw from ash tray removal. 2.1) Gently pry car Stereo trim panel from dash and set to passenger side with lighter connectors still connected. 2.2) Remove four screws securing car stereo to dash. 2.3) Pull car stereo forward, disconnect antenna and connectors.
	Aftermarket Car Stereo Wire Color Codes
	Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up
	NO AUDIO With aftermarket stereo installation?
	Erratic Volume Control DIY Repair
Isuzu Amigo Front Speaker Removal and Replacement Removing and Installing Front Speaker Isuzu Amigo 1.1) Insert flat head screw driver into slot at leading edge of car stereo speaker grill cover. 1.2) Gently pry edge of speaker grill from door panel. 2.1) Pull leading edge of speaker grill, releasing remaining clips. 2.2) Pull speaker grill cover forward releasing rear guides. 2.3) Remove four screws securing car stereo speaker to door panel. 2.4) Remove speaker and release trigger on connector to disconnect.     NOTE - for determining aftermarket installation polarity of speaker wires for correct hook up see Speaker Phasing above.     Isuzu Amigo Rear Speaker Removal and Install  Removing and Installing Rear Speaker for Isuzu Amigo 1.1) Insert flat head screw driver into slot at leading edge of car stereo speaker grill cover. 1.2) Gently pry edge of speaker grill from door panel. 2.1) Pull leading edge of speaker grill, releasing remaining clips. 2.2) Pull speaker grill cover forward releasing rear guides. 2.3) Remove four screws securing car stereo speaker to door panel. 2.4) Remove speaker and release trigger on connector to disconnect.     NOTE - for determining aftermarket installation polarity of speaker wires for correct hook up see Speaker Phasing above.
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You