Jeep Liberty Car Stereo and Speaker Removal
	Jeep Liberty Car Stereo Removal
	Afermarket Car Stereo Install
	Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up
	NO AUDIO With aftermarket stereo installation
	Jeep Liberty Front Door Speaker and Amplifier Removal and Repacement
Jeep Liberty Rear Speaker Removal and Install Jeep Liberty Rear Door Panel Speaker Removal and Installation 1.1) ROLL WINDOW DOWN. 1.2) Pry screw cover cap from door handle cavity. 2.1) Remove exposed screw. 3.1) Remove screw from arm rest. 4.1) Gently pry bottom edge of door panel from door releasing clips. All clips release with pressure. 5.1) Work your way across bottom edge of door panel releasing clips. 5.2) Work your way up both sides of door panel releasing clips. 6.1) Pull to edge of door panel away from door releasing clips. 7.1) Lift front edge of door panel up over door lock pin to release pin. 8.1) From opposite side of door, with window down. 9.1) Twist black plastic lock from door handle linkage. 10.1) Release door handle linkage down out of opening. 11.1) Check door for any panel clips that were not removed with door panel. 12.1) Pry panel clips from door to remove. 13.1) Slide panel clips back onto door panel, ready for reinstallation. 14.1) Remove three screws securing speaker to door.
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You