Mazda 626 Car Stereo Removal and Replacement
Mazda 626 How to Remove and Install Car Stereo 1.1) Remove four rubber tabs covering din holes. *NOTE - These rubber tabs when lost are gone for ever! We have not found replacements. "Din Tools" Stereo Removal Tools 2.1) Insert "Din tools" into holes on both sides of radio. 2.2) Push tools slightly to the outside of the car stereo, this releases the lock mechanism, pushing them to the side of the car stereo. 2.3) Pull unit forward from dash. 2.4) Remove antenna and connectors.
	Color Codes for Aftermarket Installation Factory Wire Harness Codes Below
	Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up
	NO AUDIO With aftermarket stereo installation?
	Erratic Volume Control DIY Repair
Mazda 6 Car Audio - Wire Diagrams - Wire Color Codes   DO NOT CUT FACTORY WIRE HARNESS     Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above. We discourage cutting the factory wire harness. This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.     Diagram 1   Diagram 2   Diagram 3   Wire diagrams may not be 100% accurate for your vehicle.
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You