| Mercury Villager Car Stereo - Car Radio Removal | |
 |
Mercury Villager |
 |
1.1) Remove two screw clips from right side of bottom console. |
 |
2.1) Remove two screw clips from left side of bottom console. 2.2) Pull console forward and set to side. |
 |
3.1) Remove two exposed screws. |
 |
4.1) Remove ash tray. 4.2) Remove two exposed screws from ash tray cavity. |
 |
5.1) Pull car stereo trim panel forward, releasing four clips. 5.2) Remove four screws securing car stereo to dash. |
 |
6.1) Pull car stereo forward from dash. |
 |
7.1) Remove two screws from each side of car stereo securing it to mounting bracket. 7.2) Disconnect antenna and wire harness. 7.3) Remove car stereo forward from bracket. |
| Front and Rear Speaker Removal presently not available. | |
| Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up |
|
| NO AUDIO With aftermarket stereo installation? |
|
| Erratic Volume Control DIY Repair |
|
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You |
|
