Mercury Villager Car Audio - Car Radio Removal
Car Stereo Replacement, Removal and Install

Mercury Villager
Car Stereo Removal
   
Car Radio Replacement, Removal and Install 1.1) Open drink holder and remove two exposed screws, one on each side of drink holder.

NOTE - On some occasions, we have been able to release clips on each side of drink holder/tray assemble and you can remove entire assembly for easier access to screws.
   
Replaceing Car Stereo, Removal and Installation 2.1) Pull on top edge of trim bezel releasing clips.
   
Replaceing Car Radio, Removal and Installation 3.1) When releasing bottom edge of trim bezel, bezel must be pushed in and up to release tabs.
   
Car Stereo Replacement, Removal and Install 4.1) Remove four screws securing car stereo to dash.
4.2) Pull car stereo forward, disconnect antenna and connectors.
   
Front and Rear Speaker Removal presently not available.
   
Locating Radio
COdE
   
Speaker Phasing
Installing Aftermarket Speakers and Proper Hook-up
   
NO AUDIO
With aftermarket stereo installation?
   
Erratic Volume Control
DIY Repair
   

Murder in St. Augustine and other tales

Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You
   

Troubleshoot and Repair Corvette Bose Radio

Murder in St. Augustine - Athalia Ponsell Lindsley

Haunted St. Augustine, the History and the tales

Historic Orlando, a pictorial of the past and present

Fire is the Test of Gold,fiction drawn from true events

An Ocklawaha River Odyssey, kayaking natural history of Florida