Mitsubishi 3000gt Car Audio - Remove, Replace and Install
Mitsubishi 3000gt  Factory Car Stereo Removal and Replacement 1.1) Pry trim bezel from around car stereo and remove. 2.1) Remove four screws securing car stereo to dash. 2.2) Pull car stereo forward, disconnect antennas and connectors.
	Aftermarket Car Stereo Wire Harness Factory Connector Codes Below
	Color Codes for Aftermarket Installation Factory Wire Harness Codes Below
	Mitsubishi 3000GT Computer Repair
	Speaker Phasing Installing Aftermarket Speakers and Proper Hook-up
	NO AUDIO With aftermarket stereo installation?
	Erratic Volume Control DIY Repair
Mitsubishi 3000GT Infiniti Amplifier Remove and Replace 1.1) Push passenger seat forward. 1.2) Pull edge of carpet back exposing two screws and remove. 2.1) Disconnect connector and "DIN" connector from front of amplifier. 2.2) Pull amplifier toward rear seat releasing front lock.
Mitsubishi 3000GT Removing and Installing Tweeter Mitsubishi 3000GT Tweeter Removal and Install 1.1) Pry edge of tweeter from dash. 2.1) Remove tweeter from cavity and disconnect.
Rear Speaker Removal and Replacement presently not available.
Factory Wire Harness Codes     DO NOT CUT FACTORY WIRE HARNESS     Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above. We discourage cutting the factory wire harness. This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.     Diagram 1   Diagram 2 1 2 3 4 5 6 7 8 9 ILL+ ACC ILL- BATT RL+ RR+ FL+ FR+ N.C. 1 2 3 4 5 FL- FR- ANT B+ RL- RR-   Diagram 3   Diagram 4   Diagrams NOT ACCURATE for 100% of vehicles.
Car Stereo Repair Home | Car Stereo Removal | Contact | Books 4 You