Car Radio Repair - Car Radio Removal - Replace and Install Car Stereo

Removing and Replacing Eclipse Infinity Car Audio

	Mitsubishi Eclipse Infinity Remove and Replace Car Stereo
	1.1) Remove trim ring from around stereo by pulling off and releasing clips. 1.2) Remove two screws securing panel.
	2.1) Remove center section of console by pulling up from center console to release. 2.2) Remove two screws exposed from removal.
	3.1) Remove two screws, one from each side of center console behind front seats. 3.2) Pull center console up, back and away from car stereo.
	4.1) Remove four screws securing car stereo to dash. 4.2) Pull from dash, disconnect antennas and wire harness.

Aftermarket Car Stereo
Wire Harness

Factory Wire Harness Codes
Below

Factory Wire Harness, Color Codes and Aftermarket Installation

Factory Wire Harness Codes
Below

Speaker Phasing
Installing Aftermarket Speakers and Proper Hook-up

NO AUDIO
With aftermarket stereo installation?

Erratic Volume Control
DIY Repair

Mitsubishi Eclipse Infinity Amplifier Removal
	1.1) Amplifier is located under passenger seat, push seat to full back position. 1.2) Remove connector and din cable.

	2.1) Push seat to full forward position. 2.2) Pull carpet flap back for access to two screws and remove.

	3.1) Lift amplifier at bracket and pull toward back of car releasing front bracket hooks. 3.2) Release triggers on connectors to remove.

Mitsubishi Eclipse CD Changer Removal
	1.1) Remove dust cover. 1.2) Pull edge of floor mat back for access..

	2.1) Disconnect din cable and power wires, usually looped into wheel well. 2.2) Remove four screws. 2.3) Remove CD changer.

Front and Rear Speaker Removal and Installation presently not available.

Factory Wire Harness Codes

DO NOT CUT FACTORY WIRE HARNESS

Aftermarket stereo installation? Why purchase the aftermarket wire harness? Installation is easier, no guess work with wire color codes and a Headache Saver! Factory wire colors codes are not universal. See Aftermarket Videos above.

We discourage cutting the factory wire harness.

This section aids in troubleshooting and determining wire color codes, phasing for speaker hook up, locating power wires for installing external devices and add-ons.

Diagram 1