 |
Nissan Armada Removing and Replacing Speakers Rear Doors |
 |
1.1) Pry small cover from door
open handle cavity. |
 |
2.1) Remove small cover and
set to side. |
 |
3.1) Remove exposed screw. |
 |
4.1) Pry edge of insert panel
from door handle cavity. |
 |
5.1) Remove insert panel. |
 |
6.1) Remove exposed screw. |
 |
7.1) Pry bottom edge of insert
panel on door pull handle releasing clips. All clips release with pry
pressure. |
 |
8.1) Pry top edge of insert
panel on door pull handle releasing clips. |
 |
9.1) Pull insert panel on door
pull handle releasing all clips. |
 |
10.1) Remove insert panel and
set to side. |
 |
11.1) Remove one exposed screw
at top of opening. |
 |
12.1) Remove one exposed screw
at bottom of opening. |
 |
13.1) Pry back edge of arm
rest panel from door panel releasing clip. |
 |
14.1) Work down edge of arm
rest panel releasing clips. |
 |
15.1) Lift arm rest panel from
door panel and set to side. |
 |
16.1) Remove exposed screw. |
 |
17.1) Pry edge of courtesy
light from door panel. |
 |
18.1) Remove courtesy light. |
 |
19.1) Release trigger on
connector. |
 |
20.1) Remove connector, set
courtesy light panel to side. |
 |
21.1) Pry front edge of
control panel releasing clip. |
 |
22.1) Lift control panel from
door panel.
22.2) Squeeze trigger at side of connector into connector to release. |
 |
23.1) Remove connector, set
control panel to side. |
 |
24.1) Pry top front edge of
door panel from door releasing clips. |
 |
25.1) Pry down front edge of
door panel releasing clips. |
 |
26.1) Pry along bottom edge of
door panel releasing clips.
26.2) Pry up back edge of door panel releasing clips. |
 |
27.1) Pry along top edge of
door panel releasing clips.
27.2) Continue prying along edge of door panel until panel releases from
door. |
 |
28.1) Pull top edge of door
panel back for access to back of panel and locate tweeter on door panel. |
 |
29.1) Release trigger on
connector to disconnect and remove. |
 |
30.1) Pull top edge of door
panel back for access to back of panel.
33.2) Locate door lock linkage. |
 |
31.1) Lift door lock linkage
away from base to unlock. |
 |
32.1) Pull linkage until cable
end aligns with slot in base. |
 |
33.1) Lift end of cable from
slot to release. |
 |
34.1) Locate door open handle
linkage.
34.2) Lift door open handle linkage away from base to unlock. |
 |
35.1) Pull linkage until cable
end aligns with slot in base. |
 |
36.1) Lift end of cable from
slot to release.
36.2) Remove door panel. |
 |
37.1) Check door panel for
remaining door panel clips. |
 |
38.1) Pry clips from door to
remove. |
 |
39.1) Slide clips into
openings on door panel ready for reinstallation. |
 |
40.1) Locate tweeter on door
panel and remove one mounting screw. |
 |
41.1) Remove second tweeter
mounting screw. |
 |
42.1) Remove tweeter. |
 |
43.1) Release trigger on
connector at door. |
 |
44.1) Remove connector to
disconnect. |
 |
45.1) Remove screws securing
speaker to door. |
 |
46.1) Remove speaker. |
