A LIST OF COMMON PROBLEMS FOR CAR STEREO
NO LONGER REPAIR
THE FOLLOWING RADIOS
SEE DO IT YOURSELF TIPS AND REPAIR
Chrysler Crossfire Car Stereo
Chrysler Crossfire
Infinity Audio System, easier to replace stereo with aftermarket than repair. Slotted "Din Tools" are required for removal. Harman / Becker
BE
6806 / A 193 820 04 86
6 CD player jammed, will not eject, will not accept CD.
However, before thinking of repair, try a reset of the stereo. Disconnect one of the main car battery terminals for several minutes then reconnect. This may bring the changer back to working properly. Otherwise, this is a repair issue.
6 CD player jammed, no eject or load. Before repair, disconnect one of the main car battery terminals for several minutes, reconnect. This may act as a reset.
P05091979AE / P05091979AF,
P05091507AD / P05091507AG,
P56038622AH and others
Common problems - no or intermittent display, no or intermittent FM, push
buttons do incorrect function, audio has static or sounds scratchy. This repair rate ranges depending on the these problems. 5 Band EQ.
Common problems - no or intermittent display, no or intermittent FM, push
buttons do incorrect function, audio has static or sounds scratchy. This repair rate ranges depending on the these problems.
Common problems - no or intermittent display, no or intermittent FM, push
buttons do incorrect function, audio has static or sounds scratchy. This repair rate ranges depending on the these problems.
A LIST OF COMMON PROBLEMS FOR CAR STEREO
NO LONGER REPAIR
THE FOLLOWING RADIOS
SEE DO IT YOURSELF TIPS AND REPAIR
Stereo dead. This is usually a defective on/off switch. Part
is no longer available for repair. Not worth repair, solder bridge the on/off switch, radio on with ignition.
94-99 Infiniti Amplifier
Speakers out or channels
missing, static, (usually the right front tweeter or speaker is first to
go).
Check speakers first! Swapping a known working speaker to the suspected bad speaker
position for testing. Defective components.
Rounded corners on your car stereo? Stereo locks up
or EQ buttons blink?
This is a defective microprocessor and programmed from the manufacturer, replace.
